changed readme

README.md

@@ -1,24 +1,9 @@
 # kickstart.nvim
-
 ## Introduction
-
+This is my personal fork of https://github.com/nvim-lua/kickstart.nvim.git
-A starting point for Neovim that is:
-
-* Small
-* Single-file
-* Completely Documented
-
-**NOT** a Neovim distribution, but instead a starting point for your configuration.
-
 ## Installation
 
 ### Install Neovim
-
-Kickstart.nvim targets *only* the latest
-['stable'](https://github.com/neovim/neovim/releases/tag/stable) and latest
-['nightly'](https://github.com/neovim/neovim/releases/tag/nightly) of Neovim.
-If you are experiencing issues, please make sure you have the latest versions.
-
 ### Install External Dependencies
 
 External Requirements:
@@ -50,20 +35,6 @@ Neovim's configurations are located under the following paths, depending on your
 | Windows (cmd)| `%localappdata%\nvim\` |
 | Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
 
-#### Recommended Step
-
-[Fork](https://docs.github.com/en/get-started/quickstart/fork-a-repo) this repo
-so that you have your own copy that you can modify, then install by cloning the
-fork to your machine using one of the commands below, depending on your OS.
-
-> **NOTE**
-> Your fork's URL will be something like this:
-> `https://github.com/<your_github_username>/kickstart.nvim.git`
-
-You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file
-too - it's ignored in the kickstart repo to make maintenance easier, but it's
-[recommended to track it in version control](https://lazy.folke.io/usage/lockfile).
-
 #### Clone kickstart.nvim
 > **NOTE**
 > If following the recommended step above (i.e., forking the repo), replace
@@ -72,7 +43,7 @@ too - it's ignored in the kickstart repo to make maintenance easier, but it's
 <details><summary> Linux and Mac </summary>
 
 ```sh
-git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
+git clone https://git.ksan.dev/ksan/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HOME/.config}"/nvim
 ```
 
 </details>
@@ -82,13 +53,13 @@ git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HO
 If you're using `cmd.exe`:
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim"
+git clone https://git.ksan.dev/ksan/kickstart.nvim.git "%localappdata%\nvim"
 ```
 
 If you're using `powershell.exe`
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim"
+git clone https://git.ksan.dev/ksan/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim"
 ```
 
 </details>

init.lua

@@ -1,89 +1,3 @@
---[[
-
-=====================================================================
-==================== READ THIS BEFORE CONTINUING ====================
-=====================================================================
-========                                    .-----.          ========
-========         .----------------------.   | === |          ========
-========         |.-""""""""""""""""""-.|   |-----|          ========
-========         ||                    ||   | === |          ========
-========         ||   KICKSTART.NVIM   ||   |-----|          ========
-========         ||                    ||   | === |          ========
-========         ||                    ||   |-----|          ========
-========         ||:Tutor              ||   |:::::|          ========
-========         |'-..................-'|   |____o|          ========
-========         `"")----------------(""`   ___________      ========
-========        /::::::::::|  |::::::::::\  \ no mouse \     ========
-========       /:::========|  |==hjkl==:::\  \ required \    ========
-========      '""""""""""""'  '""""""""""""'  '""""""""""'   ========
-========                                                     ========
-=====================================================================
-=====================================================================
-
-What is Kickstart?
-
-  Kickstart.nvim is *not* a distribution.
-
-  Kickstart.nvim is a starting point for your own configuration.
-    The goal is that you can read every line of code, top-to-bottom, understand
-    what your configuration is doing, and modify it to suit your needs.
-
-    Once you've done that, you can start exploring, configuring and tinkering to
-    make Neovim your own! That might mean leaving Kickstart just the way it is for a while
-    or immediately breaking it into modular pieces. It's up to you!
-
-    If you don't know anything about Lua, I recommend taking some time to read through
-    a guide. One possible example which will only take 10-15 minutes:
-      - https://learnxinyminutes.com/docs/lua/
-
-    After understanding a bit more about Lua, you can use `:help lua-guide` as a
-    reference for how Neovim integrates Lua.
-    - :help lua-guide
-    - (or HTML version): https://neovim.io/doc/user/lua-guide.html
-
-Kickstart Guide:
-
-  TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.
-
-    If you don't know what this means, type the following:
-      - <escape key>
-      - :
-      - Tutor
-      - <enter key>
-
-    (If you already know the Neovim basics, you can skip this step.)
-
-  Once you've completed that, you can continue working through **AND READING** the rest
-  of the kickstart init.lua.
-
-  Next, run AND READ `:help`.
-    This will open up a help window with some basic information
-    about reading, navigating and searching the builtin help documentation.
-
-    This should be the first place you go to look when you're stuck or confused
-    with something. It's one of my favorite Neovim features.
-
-    MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
-    which is very useful when you're not exactly sure of what you're looking for.
-
-  I have left several `:help X` comments throughout the init.lua
-    These are hints about where to find more information about the relevant settings,
-    plugins or Neovim features used in Kickstart.
-
-   NOTE: Look for lines like this
-
-    Throughout the file. These are for you, the reader, to help you understand what is happening.
-    Feel free to delete them once you know what you're doing, but they should serve as a guide
-    for when you are first encountering a few different constructs in your Neovim config.
-
-If you experience any errors while trying to install kickstart, run `:checkhealth` for more info.
-
-I hope you enjoy your Neovim journey,
-- TJ
-
-P.S. You can delete this when you're done too. It's your config now! :)
---]]
-
 -- Set <space> as the leader key
 -- See `:help mapleader`
 --  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
@@ -91,7 +5,7 @@ vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
 -- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = false
+vim.g.have_nerd_font = true
 
 -- [[ Setting options ]]
 -- See `:help vim.opt`
@@ -102,7 +16,7 @@ vim.g.have_nerd_font = false
 vim.opt.number = true
 -- You can also add relative line numbers, to help with jumping.
 --  Experiment for yourself to see if you like it!
--- vim.opt.relativenumber = true
+vim.opt.relativenumber = true
 
 -- Enable mouse mode, can be useful for resizing splits for example!
 vim.opt.mouse = 'a'
@@ -116,6 +30,11 @@ vim.opt.showmode = false
 --  See `:help 'clipboard'`
 vim.schedule(function()
   vim.opt.clipboard = 'unnamedplus'
+  -- Copying to system clipboard
+  -- From current cursor position to EOL (normal mode)
+  vim.keymap.set({ 'n' }, '<C-c>', '"+y$')
+  -- Current selection (visual mode)
+  vim.keymap.set({ 'v' }, '<C-c>', '"+y')
 end)
 
 -- Enable break indent
@@ -180,10 +99,10 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
 
 -- TIP: Disable arrow keys in normal mode
--- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
--- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
--- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
--- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
 
 -- Keybinds to make split navigation easier.
 --  Use CTRL+<hjkl> to switch between windows
@@ -261,11 +180,51 @@ require('lazy').setup({
     'lewis6991/gitsigns.nvim',
     opts = {
       signs = {
-        add = { text = '+' },
+        add = { text = '┃' },
-        change = { text = '~' },
+        change = { text = '┃' },
         delete = { text = '_' },
         topdelete = { text = '‾' },
         changedelete = { text = '~' },
+        untracked = { text = '┆' },
+      },
+      signs_staged = {
+        add = { text = '┃' },
+        change = { text = '┃' },
+        delete = { text = '_' },
+        topdelete = { text = '‾' },
+        changedelete = { text = '~' },
+        untracked = { text = '┆' },
+      },
+      signs_staged_enable = true,
+      signcolumn = true, -- Toggle with `:Gitsigns toggle_signs`
+      numhl = false, -- Toggle with `:Gitsigns toggle_numhl`
+      linehl = false, -- Toggle with `:Gitsigns toggle_linehl`
+      word_diff = false, -- Toggle with `:Gitsigns toggle_word_diff`
+      watch_gitdir = {
+        follow_files = true,
+      },
+      auto_attach = true,
+      attach_to_untracked = false,
+      current_line_blame = false, -- Toggle with `:Gitsigns toggle_current_line_blame`
+      current_line_blame_opts = {
+        virt_text = true,
+        virt_text_pos = 'eol', -- 'eol' | 'overlay' | 'right_align'
+        delay = 1000,
+        ignore_whitespace = false,
+        virt_text_priority = 100,
+        use_focus = true,
+      },
+      current_line_blame_formatter = '<author>, <author_time:%R> - <summary>',
+      sign_priority = 6,
+      update_debounce = 100,
+      status_formatter = nil, -- Use default
+      max_file_length = 40000, -- Disable if file is longer than this (in lines)
+      preview_config = {
+        -- Options passed to nvim_open_win
+        style = 'minimal',
+        relative = 'cursor',
+        row = 0,
+        col = 1,
       },
     },
   },
@@ -663,9 +622,10 @@ require('lazy').setup({
       --  - settings (table): Override the default settings passed when initializing the server.
       --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
-        -- clangd = {},
+        clangd = {},
         -- gopls = {},
-        -- pyright = {},
+        pyright = {},
+        jdtls = {},
         -- rust_analyzer = {},
         -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
         --
@@ -673,7 +633,7 @@ require('lazy').setup({
         --    https://github.com/pmizio/typescript-tools.nvim
         --
         -- But for many setups, the LSP (`ts_ls`) will work just fine
-        -- ts_ls = {},
+        ts_ls = {},
         --
 
         lua_ls = {
@@ -763,7 +723,9 @@ require('lazy').setup({
       formatters_by_ft = {
         lua = { 'stylua' },
         -- Conform can also run multiple formatters sequentially
-        -- python = { "isort", "black" },
+        python = { 'isort', 'black' },
+        c = { 'clang-format' },
+        java = { 'google-java-format' },
         --
         -- You can use 'stop_after_first' to run the first available formatter from the list
         -- javascript = { "prettierd", "prettier", stop_after_first = true },
@@ -957,7 +919,7 @@ require('lazy').setup({
     main = 'nvim-treesitter.configs', -- Sets main module to use for opts
     -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
     opts = {
-      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
+      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc', 'python' },
       -- Autoinstall languages that are not installed
       auto_install = true,
       highlight = {
@@ -988,10 +950,10 @@ require('lazy').setup({
   --
   -- require 'kickstart.plugins.debug',
   -- require 'kickstart.plugins.indent_line',
-  -- require 'kickstart.plugins.lint',
+  require 'kickstart.plugins.lint',
-  -- require 'kickstart.plugins.autopairs',
+  require 'kickstart.plugins.autopairs',
-  -- require 'kickstart.plugins.neo-tree',
+  require 'kickstart.plugins.neo-tree',
-  -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
+  require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
   --    This is the easiest way to modularize your config.

lazy-lock.json

@@ -0,0 +1,32 @@
+{
+  "LuaSnip": { "branch": "master", "commit": "831a130291eb6dae0dabd2748d0a99401a2eebc4" },
+  "cmp-nvim-lsp": { "branch": "main", "commit": "a8912b88ce488f411177fc8aed358b04dc246d7b" },
+  "cmp-nvim-lsp-signature-help": { "branch": "main", "commit": "031e6ba70b0ad5eee49fd2120ff7a2e325b17fa7" },
+  "cmp-path": { "branch": "main", "commit": "e52e640b7befd8113b3350f46e8cfcfe98fcf730" },
+  "cmp_luasnip": { "branch": "master", "commit": "98d9cb5c2c38532bd9bdb481067b20fea8f32e90" },
+  "conform.nvim": { "branch": "master", "commit": "973f3cb73887d510321653044791d7937c7ec0fa" },
+  "fidget.nvim": { "branch": "main", "commit": "d9ba6b7bfe29b3119a610892af67602641da778e" },
+  "gitsigns.nvim": { "branch": "main", "commit": "1fcaddcc427ff5802b6602f46de37a5352d0f9e0" },
+  "lazy.nvim": { "branch": "main", "commit": "6c3bda4aca61a13a9c63f1c1d1b16b9d3be90d7a" },
+  "lazydev.nvim": { "branch": "main", "commit": "2367a6c0a01eb9edb0464731cc0fb61ed9ab9d2c" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "bb3a17efc797c34c054463174e5522442576ebd8" },
+  "mason-tool-installer.nvim": { "branch": "main", "commit": "517ef5994ef9d6b738322664d5fdd948f0fdeb46" },
+  "mason.nvim": { "branch": "main", "commit": "8024d64e1330b86044fed4c8494ef3dcd483a67c" },
+  "mini.nvim": { "branch": "main", "commit": "432a0614f8dc38715892b0eec537716457ea4c2f" },
+  "neo-tree.nvim": { "branch": "main", "commit": "cea666ef965884414b1b71f6b39a537f9238bdb2" },
+  "nui.nvim": { "branch": "main", "commit": "de740991c12411b663994b2860f1a4fd0937c130" },
+  "nvim-autopairs": { "branch": "master", "commit": "23320e75953ac82e559c610bec5a90d9c6dfa743" },
+  "nvim-cmp": { "branch": "main", "commit": "b5311ab3ed9c846b585c0c15b7559be131ec4be9" },
+  "nvim-lint": { "branch": "master", "commit": "9c6207559297b24f0b7c32829f8e45f7d65b991f" },
+  "nvim-lspconfig": { "branch": "master", "commit": "f47cd681d7cb6048876a2e908b6d8ba1e530d152" },
+  "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
+  "nvim-web-devicons": { "branch": "master", "commit": "0422a19d9aa3aad2c7e5cca167e5407b13407a9d" },
+  "plenary.nvim": { "branch": "master", "commit": "857c5ac632080dba10aae49dba902ce3abf91b35" },
+  "telescope-fzf-native.nvim": { "branch": "main", "commit": "1f08ed60cafc8f6168b72b80be2b2ea149813e55" },
+  "telescope-ui-select.nvim": { "branch": "master", "commit": "6e51d7da30bd139a6950adf2a47fda6df9fa06d2" },
+  "telescope.nvim": { "branch": "0.1.x", "commit": "a0bbec21143c7bc5f8bb02e0005fa0b982edc026" },
+  "todo-comments.nvim": { "branch": "main", "commit": "304a8d204ee787d2544d8bc23cd38d2f929e7cc5" },
+  "tokyonight.nvim": { "branch": "main", "commit": "057ef5d260c1931f1dffd0f052c685dcd14100a3" },
+  "vim-sleuth": { "branch": "master", "commit": "be69bff86754b1aa5adcbb527d7fcd1635a84080" },
+  "which-key.nvim": { "branch": "main", "commit": "370ec46f710e058c9c1646273e6b225acf47cbed" }
+}